Samsung DCS Technical Manual page 130

SAMSUNG DCS
TECHNICAL MANUAL
MMC 428:
Applicable to all versions of the DCS 70 and DCS 24 software and to DCS version 6 software. Not
applicable to DX408.
DESCRIPTION:
Assigns which trunks can be used for outgoing calls in the case of DISA out calls or Trunk to Trunk transfer
call from specific trunks on a per trunk basis. This is useful in the case of having many companies on one
system.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ANS/RLS
ACTION
1 Press TRSF 428
Display shows
2. Dial the Trunk number ( eg., 705)
Press UP or DOWN key to select station and
press RIGHT soft key to advance to step 3
3. Dial the trunk ID number ( eg., 704)
Press UP or DOWN key to select trunk and
press RIGHT soft key to advance to step 4
4. Press UP or DOWN key to select YES/NO
option
Dial 1 for YES or 0 for NO and press RIGHT
soft key to move cursor to ANS option
Press UP or DOWN key to select YES/NO
option
Dial 1 for YES or 0 for NO and press
RIGHT soft key to return to step 2
5. Press TRSF to store and exit
Press SPK to store and advance to next
MMC
DEFAULT DATA:
Page 130 of 287 Updated I&M
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
OR
OR
OR
OR
OR
DIAL = Yes
Trunk/Trunk
DISPLAY
[701] USE
DIAL : YES
[705] USE
DIAL : YES
[705] USE
DIAL : YES
[705] USE
DIAL : NO
[705] USE
DIAL : NO
PROGRAMMING
SECTION
[701]
[701]
[704]
[704]
[704]
May 2002