Samsung DCS Technical Manual page 158

SAMSUNG DCS
TECHNICAL MANUAL
MMC 601:
DESCRIPTION:
This program is much like MMC 600 Assign Operator Group but this one is for stations only. The station
groups that are available in this MMC will provide more flexibility in the usage of Uniform Call Distribution
(UCD), AA GROUP and VM/AA applications. A station, Common bell, and Ring Page can be in more than
one group, but must all be the same ring type. There is a maximum of 48 members per group.
NOTE:
1. A device for announcement if used must provide a hookflash and return the call back to the
group. If a station is in more than one group and attempts to use the IOG key, it will be removed
from all groups.
2. In DCS/Compact System: maximum 30 of members are allowed in one group.
GROUP TYPES
0 NORMAL GROUP
1 VMAA GROUP
2 UCD GROUP
3 AA GROUP
Other possible entries:
3801–3820 COM. BELL
3601–3640 RING PAGE
FEATURE KEY
0 TYPE Group type (Normal, VM/AA, UCD)
1 RING Ring mode
2 OVERFLOW Overflow time
3 GRP TRSF Group transfer time
4 WRAP-UP Wrap-up time (timer only valid in type = UCD)
5 NEXT PORT Overflow port
6 MEMBER Group member (eg., station 202)
RING MODES
0 SEQUENTIAL
1 DISTRIBUTE
2 UNCONDITION
Page 158 of 287 Updated I&M
Can only have distribute or sequential ringing.
Has wrapup capability.
Can only have distribute or sequential ringing.
This device is a common bell relay on a Trunk A card.
This device is ring over an external page zone output of a Trunk A
card.
The first idle station listed in the group will ring. If the first is busy, the next
idle station will ring.
The first call will ring the first station listed in the group. The next call will ring
the next station listed in the group.
All the stations listed in the group will ring, busy stations will receive off-hook
ring. MAXIMUM 32 STATIONS RINGING.
Assign Station Group
PROGRAMMING
SECTION
May 2002