Samsung DCS Technical Manual page 270

SAMSUNG DCS
TECHNICAL MANUAL
MMC 802:
DESCRIPTION:
Allows the customer to have access to certain MMCs. For example, it is advised that the customer have
access to MMC 102 Call Forward for call forwarding but it is not advised that the customer has access to
MMC 710 LCR Digit Table for LCR dial plans. This MMC is for both tenants.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
ACTION
1. Press TRSF 802
Display shows
2. Enter desired tenant number (1-2) via
dial keypad
Press UP or DOWN key to make selection
and Press RIGHT soft key to move cursor
3. Enter desired MMC number via dial keypad
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor
4. Enter 1 for YES or 0 for NO via dial keypad
Press UP or DOWN key to make selection
and press LEFT soft key to return
to step 3 to make additional entries
5. Press TRSF to store and exit
Press SPK to store and advance to next
MMC
DEFAULT DATA:
RELATED ITEMS:
Page 270 of 287 Updated I&M
Customer Access MMC Number
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
OR
OR
OR
OR
Refer to the Table on the next page
NONE
PROGRAMMING
DISPLAY
CUSTOMER ACCESS : 1
100 : STN LOCK : YES
MMC TENANT : 1
100 : STN LOCK : YES
MMC TENANT : 1
102 : CALL FWD : YES
MMC TENANT : 1
102 : CALL FWD : NO
May 2002
SECTION