Samsung DCS Technical Manual page 247

SAMSUNG DCS
TECHNICAL MANUAL
MMC 737:
DESCRIPTION:
This MMC is used to control the codes of DECT option for the DCS 200, DCS 70 and DCS Compact. Two
codes are required for the DECT feature:
•
SYSTEM ID
Composed of 3-hexadecimal digits (range : 011 ~ FFF) to distinguish between SAMSUNG DCS DECT
systems. The installer of SAMSUNG DECT system must program a unique SYSTEM ID value.
NOTE: The SYSTEM ID value must be greater than 011.( SYSTEM ID range : 011 ~ FFF)
•
AC (Authentication) Code
The Authentication code is used when registering a DECT handset. The system compares the
Authentication Code entered against the programmed code if it is same the system will allow the handset to
be registered. Otherwise the system rejects registration. The Authentication Code consists of 4-hexadecimal
digits (0000 through 9999);the default value is FFFF.
After the registration of DECT handsets is completed using this MMC, the Codes (SYSTEM ID and AC)
should not be changed to avoid modification of the Data Base for DECT registration information.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 737
Display show
2. Press RIGHT soft key to move the cursor
and enter the new AUTH CODE eg. 1234
Press the RIGHT soft key to store
3. Press UP or DOWN key to select SYSTEM
ID and press RIGHT soft key to move cursor
4. Enter the new SYSTEM ID eg. 678
and press RIGHT soft key
Press TRSF to store and exit
Press SPK to store and advance to next
MMC
Page 247 of 287 Updated I&M
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
OR
DECT System Codes
DISPLAY
DECT SYSTEM CODE
AUTH CODE:FFFF
DECT SYSTEM CODE
AUTH CODE:1234
DECT SYSTEM CODE
SYSTEM ID:000
DECT SYSTEM CODE
SYSTEM ID:678
DECT SYSTEM CODE
SYSTEM ID:678
PROGRAMMING
SECTION
May 2002