Samsung DCS Technical Manual page 272

SAMSUNG DCS
TECHNICAL MANUAL
MMC 804:
DESCRIPTION:
Provides a means of setting parameters for the system serial ports to work with one of the following:
• PCMMC
• SMDR reporting
• UCD statistics report/periodic UCD information.
• CTI for use with Windows NT applications
• SMDI for Voice mail integration
Programming can be accomplished easily with the tables below to customise any serial port.
PARAMETER OPTIONS
Dial 0 Service
Dial 1 Baud Rate
Dial 2 Char Length
Dial 3 Parity
Dial 4 Retry Count
Dial 5 Stop Bit
Dial 6 Wait Time
Dial 7 SIM Pair
SERVICE TYPE
Dial 0 PCMMC
Dial 1 SMDR
Dial 2 UCD REPT
Dial 3 UCD/ SMDR
Dial 4 CTI
Dial 5 CTI/SMDR
Dial 6 CTI/UCD
Dial 7 CTI/S/U
Dial 8 VM TRACE
Dial 9 Not used
NOTE: Service Types 4 to 9 are not applicable to DCS 24.
SPEED
Dial 0 1200 bps
Dial 1 2400 bps
Dial 2 4800 bps
Dial 3 9600 bps
Dial 4 19200 bps
CHARACTER LENGTH
Dial 7 7 bits
Dial 8 8 bits
PARITY
Dial 0 None
Dial 1 Odd
Page 272 of 287 Updated I&M
Type of Service
Speed
Character Length
Parity Bit
Number of Retries
Stop Bit
Message Wait Time
Station Number Connected to SIM
PCMMC
SMDR
UCD Report on request by the Supervisor or daily
Both SMDR and UCD Report will be generated
CTI data
CTI and SMDR data
CTI and UCD reports and periodic data
CTI and SMDR and UCD reports and periodic data
Cadence Message Trace
19200bps is not available on DCS 70 or DCS 24
System I/O Parameter
PROGRAMMING
SECTION
May 2002