Assign Role - Honeywell Fire-Lite Alarms ES-1000X Manual

Users and Passwords
Select 1 to enable the User account. Each press of the 1 key will toggle the screen between Enabled Yes and Enabled No. Press 3 to assign a
password. Note that if a user is disabled at any time, the password will need to be reassigned.
A flashing cursor will appear in the center of the display. The administrator must re-enter their password. Then, enter the new 8-digit pass-
word for the User account. When the last digit is entered, the following screen will be displayed:
Re-enter the new User password to verify the change. A message will appear showing the password has been successfully changed.

Invalid Password
If a password is entered incorrectly or is not a valid password, the panel will display either of the following messages.
The programmer may hit the Escape or Enter key and re-enter the password correctly.

Incorrect Password/Timeout
An administrator has two attempts to enter the correct password. If the password is incorrect after the two attempts, the administrator must
wait 60 seconds for another attempt. However, if the password has been forgotten, record the 20-character code and contact Fire•Lite Tech-
nical Services. After proper authentication, the password will be supplied to the administrator.

Assign Role

The Administrator has permissions to assign the programming roles of the User accounts. The Master Program Level is used for program-
ming panel specific data relating to device types, zoning, messages, control panel functions, etc. The Maintenance Program Level is used by
a qualified operator to access features such as Disable/Enable, View and Clear History, Walktest and System Time Change.
To assign roles to specific users, press the Enter key on the home screen. The following screen will display:
Press 2 to login to the panel. The following screen will appear.
Select 1 for Administrators.
Select the appropriate administrator. .
Enter the eight-digit password. Note that the passwords will not be displayed on LCD annunciators.
ES-1000X Series Manual — P/N LS10133-000FL-E:A 6/21/2023
MODIFY USER X
ENTER PASSWORDS
ADMIN X:
NEW:
MODIFY USER X
VERIFY PASSWORD
NEW:
MODIFY ______ X
_____ X PASSWORD
IS INCORRECT
PRESS ENTER OR ESC
INVALID PASSWORD
PRESS ENTER OR ESC
MAIN MENU
1=READ STATUS MODE
2=LOGIN
SELECT ACCOUNT
1=ADMINISTRATORS
2=USERS
3=NOT USED
SELECT ADMIN
1=ADMIN 1
2=ADMIN 2
LOGIN FOR ADMIN X
ENTER PASSWORD
MODIFY ______ X
NEW PASSWORD CANNOT
BE ALL THE SAME CHAR
PRESS ENTER OR ESC
Programming
47