NFPA Standard-Specific Requirements
NFPA 72 Remote Station Protective Signaling System
Notes:
1.
Enable 4XTMF supervision in FACP System Setup programming. Refer to page 77 for more information.
2.
Refer to "4XTMF Transmitter Module Installation" on page 29 for detailed information.
Cutting TBL Jumper allows the
reverse polarity circuit to open with
a system trouble condition if no
alarm condition exists.
138
RS82 Remote Station Receiver UL listed.
Refer to Instruction Manual for Remote Station Receiver Model RS82.
Figure C.2 Remote Station Connection Using 4XTMF Module
Polarity Shown is
Normal Standby
+
-
+
Power-limited
-
(Dummy load with a 4.7K
when no connection is made)
4XTMF Transmitter Module
ES-1000X Series Manual — P/N LS10133-000FL-E:A 6/21/2023
Ω
, ¼ watt resistor