Table of Contents
Advertisement
7.10.21
SpeedDome
Format switch SW1
Mode switch
Data connection
Speedome RS-485 receivers may be daisy chain or star connected with up to 16
receivers supported per RD-316 Module. Field cables may connect to DB25 pin pair
7(B) and 20(A) or pin pair 8(B) and 21(A).
7.10.22
Kalatel
Format switch SW1
Mode switch
Data connection
Kalatel RS-485 protocol converters may be directly connected with up to 16 receivers
supported per RD316 Module. Converter cables may connect to DB25 pin pair 7(B) and
20(A) or pin pair 8(B) and 21(A). Tours 1-4 (where supported on Kalatel product) may be
activated through use of auxiliary outputs 5-8. Auxiliary output 2 is mapped to the auto
focus function.
Note: A Kalatel protocol converter must be used to convert the protocol to RS485 format.
One type is the KTD-93-1.
7.10.23
Baxall
Format switch SW1
Mode switch
Data connection
Baxall RS-485 receivers may be daisy chain or star connected with up to 16 receivers
supported per RD316 Module. Field cables may connect to DB25 pin pair 7(B) and
20(A) or pin pair 8(B) and 21(A).
Rev. C
1 - 4 OFF
SW2
2, 5 – 8 OFF
SW2
1, 3, 4 ON
1 - 4 OFF
SW2
3, 4, 6 – 8 OFF
SW2
1, 2, 5 ON
1 - 4 OFF
SW2
1, 2, 4, 6 – 8 OFF
SW2
3, 5 ON
7.10-11
HMXMU001018
10/06
Advertisement
Table of Contents
