Mx04 & Mx08 Multi-Port Serial Cards; Switch Settings - Honeywell MAXPRO-Net Hardware Installation Manual

7.2 MX04 & MX08 MULTI-PORT SERIAL CARDS
The MX04/MX08 cards are used to provide multiple RS-232 serial communication ports
in MAX-1000 System Controllers. The MX04 and MX08 provide 4 ports and 8 ports
respectively. The boards plug into any available ISA expansion slot in the control
computer, with the maximum combination being two MX08 and one MX04 boards,
giving a total of 20 ports.
Note: This card is not used with MAXPRO-Net. MAXPRO-Net uses standard windows
PCA Serial Port expanders.
7.2.1

Switch Settings

Each board has a 4-way DIP switch. This sets the address for each port and is detailed
in the table below. Note that SW4 is not used. No two cards in any System Controller
should have the same switch settings.
SW1 SW2 SW3
ON ON ON
ON ON OFF
(DEFAULT)
ON OFF ON
ON OFF OFF
OFF ON ON
Rev. C
MX08 Switch Settings
PORT 1 PORT 2 PORT 3
$3F8~ $2F8~ $2B0~
$3FF $2FF $2B7
$160~ $168~ $170~
$167 $16F $177
$2A0~ $2A8~ $2B0~
$2A7 $2AF $2B7
$2F8~ $2A8~ $2B0~
$2FF $2AF $2B7
$3F8~ $2F8~ $3E8~
$3FF $2FF $3EF
PORT 4 PORT 5
$2B8~ $1A0~
$2BF $1A7
$178~ $180~
$17F $187
$2B8~ $1A0~
$2BF $1A7
$2B8~ $1A0~
$2BF $1A7
$2E8~ $280~
$2EF $287
7.2-1
PORT 6 PORT 7 PORT 8
$1A8~ $1B0~ $1B8~
$1AF $1B7 $1BF
$188~ $190~ $198~
$18F $197 $19F
$1A8~ $1B0~ $1B8~
$1AF $1B7 $1BF
$1A8~ $1B0~ $1B8~
$1AF $1B7 $1BF
$288~ $290~ $298~
$28F $297 $29F
HMXMU001018
10/06