Keyboard Extension Cable; Power Distribution - Honeywell MAXPRO-Net Hardware Installation Manual

Crosspoint matrix video switching system
Hide thumbs Also See for MAXPRO-Net:
Table of Contents

Advertisement

9.5.4

Keyboard Extension Cable

The HEGS5300 keyboards, as supplied, include a one-meter standard length of interface
cable. Should there be a need, for a longer cable, an extension kit is available from the
supplier. This kit has a male DB15 plug and a female DB15 socket, two Amidon
Associates FB-43-5621 Shielding Beads and interconnect cable (Beldon 8732 or
equivalent) cut to the required length.
9.6

POWER DISTRIBUTION

Power distribution is a confusing and difficult area to estimate. Choosing the correct
cable conductor is of major importance to minimize systems costs while maintaining
power requirements for the equipment used. Minimum power requirements of PTZ site
receivers, cameras, and other remote equipment must be observed with respect to total
load on the power feed and voltage fluctuations caused by varying load demands of the
equipment (PTZ operation etc). This should NOT be calculated on an average
consumption basis. Maximum (worst case) conditions should always be assumed.
Rev. C
WARNING: Always disconnect the mains power supply
before accessing the equipment to be serviced.
WARNING: All mains powered equipment should be
connected via a locally mounted switched GPO outlet.
Direct mains connection is illegal.
WARNING: When servicing equipment, the use of
SERVICE TAGS should be employed at switchboards,
circuit breakers, fuses and/or mains outlets to warn other
personnel that the distributed power feed has been
isolated.
WARNING: All precautions should be observed to
prevent ELECTRICAL SHOCK.
9-8
HMXMU001018
10/06

Advertisement

Table of Contents
loading

Table of Contents