Table of Contents
Advertisement
5.3.1
ERRORLOG Report (in SetMax Configurator)
When a Macro Error is detected, it is written into the ERRORLOG database that can be
viewed from SetMax Configurator (ErrorLog Tab). This error report contains the
time/date that the macro error occurred, the macro error number and a macro trail.
The macro trail details the actual event that caused the macro to begin execution and
lists the various system macro library lines called prior to the macro error occurring.
This information is essential in locating the actual macro command that generated the
error. The following are examples of reported macro errors.
27/NOV/96 17:39.31 -> ??MACRO ERROR #15 KB:1 (KB01:KI017,%040,%041,%042)
27/NOV/96 17:39.42 -> ??MACRO ERROR #51 KB:5 (KB05:AS104,%301,%050)
27/NOV/96 17:39.50 -> ??MACRO ERROR #14 KB:34 (KB34:TM001,%113,%114)
The following table describes the two-letter macro event code for the reported macro
error.
Event Code
AS
AF
VS
VF
CB
WB
KI
KR
PE
NT
LN
LB
SN
SF
UM
TM
DM
The macro error report also details other important events in the MAXPRO-Net
Crosspoint Matrix Video Switching System. For example:
Rev. C
Description of Event
External alarm start macro
External alarm finish macro
Video input start macro
Video input finish macro
System cold boot macro
System warm boot macro
Keyboard key intercept macro (key-pressed)
Keyboard key intercept macro (key-released)
Keyboard post event macro (executed)
Network macro received from another MAXPRO-Net network node
local network macro (internal action request type)
local network macro (status broadcast type)
operator sign-on macro
operator sign-off macro
keyboard user macro
timed-event macro
Direct macro command from an external system (via highlevel)
5-6
HMXMU01018
10/06
Advertisement
Table of Contents
