Table of Contents
Advertisement
If the HMX832 or HMX832L Module is being used to switch Audio signals through the
Matrix, 75 ohm terminating is not required and the jumpers should be placed in the
"OFF" position (to the left).
11.19.5
Installation Accessories
From the factory the HMX832L is provided with one MXLCM4 cable. This cable is
400mm in length and is fitted with one 16-way IDC style female connector at each end.
This cable assembly is used to connect HMX832L Modules to subsequent HMX832L
Modules or to MXBNC64 or MXBNC128 Video Input Plates (Patch Panels).
An optional MXLCM8 can be ordered which is 800mm in length.
There is also a MXCCxM cable assembly ("x" denotes variables 1, 2, or 3 for 1000mm,
2000mm or 3000mm lengths), used to inter-connect MX-832L Modules to MX116 Video
Output Modules in the HD-Series of Matrix Switches.
Rev. C
11-19
HMXMU001018
10/06
Advertisement
Table of Contents
