Table of Contents
Advertisement
7.11.9
RD378 Privacy Zones, Continued
Disabling Privacy Zones
To disable a privacy zone, simply set the required views at the same position. Only if the
view positions are different will the zone be enabled. Similarly, if the view for the top
right corner of the privacy zone is set to the left or below the bottom left corner of the
zone, the privacy zone will be disabled.
Combining Privacy Zones
Privacy zones with shapes other than rectangles can be created by combining 2 or more
zones. See diagram below.
View 90
When combining privacy zones it is best to keep the zoom settings of the bottom left
corner views (90 and 92 in the above diagram) the same. In this way when zooming out,
both privacy zones will be disabled together, and conversely when zooming in both will
be enabled together.
Privacy Zones and Views
When recalling views, it is possible a privacy zone is between the current position and
view setting. If this is the case, as the pan/tilt reaches the edge of the privacy zone all
pan, tilt, zoom and focus operations from the keyboard (for that camera) are disabled
until the pan/tilt reaches the other side of the privacy zone. See diagram below.
Current Position
Rev. C
Privacy
Zone 1
View 92
Pan and tilt zoom and focus disabled while in this region
7.11-11
View 91
Privacy
Zone 2
Privacy
Zone
View 93
View
HMXMU001018
10/06
Advertisement
Table of Contents
