Table of Contents
Advertisement
7.10.6
PELCO - Intercept/Legacy – AD Format
Format switch SW1
Mode switch
Data connection
Intercept/Legacy receivers may be connected with up to 16 receivers supported per RD-
316 module. Field cables may connect to DB25 pin pair 7(B) and 20(A) or pin pair 8(B)
and 21(A). Terminal A should connect to RX+, and terminal B should connect to RX-.
Note: Receiver addressing via the onboard DIP switch is true binary with a supported
range of 1 through 16 on each RD316. Data rate is 2400bps.
7.10.7
PELCO - Intercept/Legacy – Pelco 9750 Format
Format switch SW1
Mode switch
Data connection
Intercept/Legacy receivers may be connected with up to 16 receivers supported per
RD316 module. Field cables may connect to DB25 pin pair 7(B) and 20(A) or pin pair
8(B) and 21(A). Terminal A should connect to RX+, and terminal B should connect to
RX-.
Note: Receiver addressing via the onboard DIP switch is true binary with a supported
range of 1 through 16 on each RD316. Data rate is 4800bps.
Note: Intercept and Legacy are trademarks of PELCO.
Rev. C
1 - 4 OFF
SW2
1, 3 - 8 OFF
SW2
2 ON
1 - 4 OFF
SW2
2 - 8 OFF
SW2
1 ON
7.10-5
HMXMU001018
10/06
Advertisement
Table of Contents
