Macro Errors - Honeywell MAXPRO-Net Hardware Installation Manual

5.3

MACRO ERRORS

Macro errors are displayed as a warning message on the video monitors text overlay for
a period of two seconds following the error condition occurring. It is also recorded in a
text file called ERRORLOG that can be viewed in the MaxMon Error Log window or in the
Maxmon utility, together with a macro trail to help identify the cause of the macro error.
01 Format error in extended command
02 Format error in conditional command
03 Unknown command in expression evaluation
04 Unknown command in update expression
05 Numeric variable range error
06 Scan sequence range error
07 External alarm range error
08 Auxiliary control output range error
09 Invalid numeric evaluation error
10 Macro timer range error
11 Macro timer command error
12 Macro timer period error
13 System macro range error
14 Unknown video output channel
15 Unknown video input source
16 Invalid external alarm control logic
17 Invalid auxiliary output control logic
18 Invalid camera disable logic
19 Invalid PTZ speed
20 Unknown system constant error
21 Unknown text message command error
22 Invalid operator sign used with commands
23 invalid keyboard identification number
24 Invalid alarm stack entry i.e.: not an alarm macro
25 Invalid alarm display group (1
26 Macro string exceeds 255 characters
27 Conditional statement missing closed brackets
28 Invalid real time clock time or date definition
29 Invalid video source command
Rev. C
Macro Error Definition Table
50) only
5-4 HMXMU01018
10/06