Table of Contents
Advertisement
7.10.5
Diamond Electronics - FastScan/SmartScan
Format switch SW1
Mode switch
Data Connection
FastScan/SmartScan receivers may be daisy chained or star connected with up to 16
receivers supported per RD316 module. Field cables may connect to DB25 pin pair 7(B)
and 20(A) or pin pair 8(B) and 21(A).
The auto-iris function supported by the receivers may be enabled by setting auxiliary
output 1 as defined in MAXPRO-Net to ON, any manual iris control function activated
thereafter will return the receiver to manual iris mode.
Using The Diamond Dome Camera Set-up Menu
Before You Start:
1. Is the Dome operational and can you control it? Pan/Tilt etc
2. Check Firmware version:
Controller Card
3. Equipment Required:
•
•
•
•
•
Rev. C
1 - 4 OFF
SW2
1 - 8 OFF
RD316
HMX128
MAXPRO-Net System
Dome to be configured
MaxMon Utility
QWERTY Keyboard
Two monitors
Firmware Version
V2.0 and above
MX-308 Chip V1.06 and above
7.10-3
HMXMU001018
10/06
Advertisement
Table of Contents
