Table of Contents
Advertisement
7.8
MX205 TEXT INSERTION MODULE
The MX205 Text Insertion Module is a single channel video-processing device used to
write up to five (5) lines of text information onto a video picture with the added benefit of
displaying seconds of time, unlike the RD200 Text Insertion Module.
In addition to test insertion, the MX205 Module provides Dynamic Cable Equalization up
to 700 meters. The displayed text is used to display labeling and feedback information
to the system operators through the video monitors. Information such as, camera
identification, time/date display, monitor number, current operator access and other
system operation information can all be displayed.
Some other applications for the MX205 Modules are; text labeling for VCR recorded
signals (recorded camera identity and time/date), and display of alarm detection
information. Text can be displayed in a variety of modes including straight forward white
text over the video picture, white text with black shadowing, white text with a solid black
background for the entire text insertion window, reverse mode to exchange white and
black display (i.e. give black text on a white background or shadow.), and normal or
double-height text when bold displays are required (e.g. alarm display, for VCR
recording to increase replay readability). A text display can also be FLASHED to attract
the system operator's attention.
The positioning of the text display on a screen and display mode required is
programmable from the MAX-1000 System Configuration Utility. No manual settings are
done on the MX205 Module.
Rev. C
NOTE: The MX205 is a Surface-Mount Device Module
that has been designed to supersede the previous RD205
Module.
7.8-1
HMXMU001018
10/06
Advertisement
Table of Contents
