Table of Contents
Advertisement
11.4 STARTUP
a) Insert the supplied system software (disk) into the floppy disk drive of your System
Controller.
b) Apply power to your System Controller/power supply.
c) Wait for your system to boot, your system will now be operational.
11.5 BASE CONFIGURATION
As shipped, your MAXPRO-Net HD Series switcher is pre-configured as follows: -
a) All video inputs are defined as cameras with names preset to CAMERA xx, where xx
is the physical input number. The only exception to the above is the final video input
which has been defined as the system menu input.
b) All cameras have pan/tilt/zoom control defined.
c) Video fail/level testing is disabled (this is to prevent numerous alarms from
unconnected or non-existent video sources).
d) All video outputs are configured as monitors with text, the first monitor output has
been configured to display all alarms.
e) Keyboard and operator definitions have already been entered, however no
password log-on/off requirement has been defined).
NOTE: QWERTY keyboards have menu access through the "SHIFT" and "?" keys when
Rev. C
operated simultaneously.
11-2
HMXMU001018
10/06
Advertisement
Table of Contents
