Jumper Jp1 - Honeywell MAXPRO-Net Hardware Installation Manual

7.2.1 Switch Settings, Continued
SW1
ON
ON
(DEFAULT)
ON
ON
OFF
OFF
OFF
7.2.2

Jumper JP1

This jumper controls the IRQ number for port 1 interrupt. Setting the jumper in the top
position selects IRQ3 (default), and in the bottom position selects IRQ4. Selecting IRQ4
may be required in some high-level interface applications. Ports 2 to 8 (or ports 2 to 4
with the MX04) are fixed at interrupt IRQ3.
Rev. C
MX04 Switch Settings
SW2 SW3 PORT 1
ON ON $3F8~
$3FF
ON OFF $160~
$167
OFF ON $2A0~
$2A7
OFF OFF $2F8~
$2FF
ON ON $1A0~
$1A7
ON OFF $180~
$187
OFF ON $3F8~
$3FF
7.2-2
PORT 2 PORT 3 PORT 4
$2F8~ $2B0~ $2B8~
$2FF $2B7 $2BF
$168~ $170~ $178~
$16F $177 $17F
$2A8~ $2B0~ $2B8~
$2AF $2B7 $2BF
$2A8~ $2B0~ $2B8~
$2AF $2B7 $2BF
$1A8~ $1B0~ $1B8~
$1AF $1B7 $1BF
$188~ $190~ $198~
$18F $197 $19F
$2F8~ $3E8~ $2E8~
$2FF $3EF $2EF
HMXMU001018
10/06