Front Panel Description; Table; Bcc Front Panel Indicators - Cisco BPX-BXM-155-8DX Installation And Configuration Manual

Chapter 3 BPX Switch Common Core Components
Figure 3-2
module 1
DRSIU

Front Panel Description

The BCC front panel has four Led, three card status LEDs, and a LAN LED. (See Figure 3-3 and

Table 3-1.)

Table 3-1
No
1
2
3
4
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
BCC4V Block Diagram
I/O I/O
module 2
DRSIU
S

BCC Front Panel Indicators

Indicator Function
LAN Indicates there is data activity over the Ethernet LAN port.
card - act Card active LED indicates this BCC is online and actively
controlling the node.
card - stby Card standby LED indicates this BCC is offline but is ready to
take over control of the node at a moments notice.
card - fail Card fail LED indicates this BCC has failed the internal self-test
routine and needs to be reset or replaced.
module 12
DRSIU
TX data-2A
RX data-2A
TX data-12A
RX data-12A
s6392
Cisco BPX 8600 Series Installation and Configuration
Broadband Controller Card (BCCs)
I/O
TX data-1A
RX data-1A
BCC-A
Polling bus-A
Polling bus-B
TX data-1B
RX data-1B
TX data-2B
RX data-2B
TX data-12B
BCC-A
RX data-12B
3-5