Abr Connection Policing; Ubr Connection Policing; Leaky Bucket 1; Figure 21-29 Vbr.3 Connection, Policing = 3, With Bucket 2 Non-Compliant - Cisco BPX-BXM-155-8DX Installation And Configuration Manual

Cisco bpx-bxm-155-8dx: user guide
Table of Contents

Advertisement

Traffic Policing Examples

Figure 21-29 VBR.3 Connection, Policing = 3, with Bucket 2 non-compliant

Connection setup
and compliance status:
VBR.3
Policing = 3
Bkt 1 depth < CDVT(0+1)
Bkt 2 depth > BT + CDVT
CLP=1
Time
interval
variations
CDVT(0+1)
Leaky Bkt 1

ABR Connection Policing

Available Bit Rate (ABR) connections are policed the same as the VBR connections, but in addition use
either the ABR Standard with VSVD congestion flow control method or the ForeSight option to take
advantage of unused bandwidth when it is available.

UBR Connection Policing

The contract for a unspecified bit rate connection is similar to the ABR connection service for bursty
data. However, UBR traffic is delivered only when there is spare bandwidth in the network.
When a connection is added, a VPI.VCI address is assigned, and UPC parameters are configured for the
connection. For each cell in an ATM stream, the VPI.VCI addresses are verified and each cell is checked
for compliance with the UPC parameters as shown in Figure 21-30.

Leaky Bucket 1

Leaky bucket 1 polices the UBR connection for PCR compliance. When CLP=No (UBR.1), all cells
that are compliant with leaky bucket 1 are applied to the network. However, these cells are treated with
low priority in the network with a percentage utilization default of 1 percent.
Cisco BPX 8600 Series Installation and Configuration
21-54
5
4
3
2
CLP=0
CLP=1
CLP=0
5
CLP=1
CLP=0
CLP(0) cells
+
compliant with
Leaky Bkt 1
are applied to
Leaky Bkt 2
PCR(0+1)
Leaky Bkt 1
discards
if depth >
CDVT(0+1)
1
CLP=0
3
CLP(1) cells compliant with Leaky Bkt 1, admit to network
CLP=1
4
2
1
CLP=0
CLP=0
BT + CDVT
Leaky Bkt 2
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
Chapter 21
Configuring ATM Connections
4
CLP=0
CLP=1
Two CLP(0) cells, 1 and 2,
are shown as non-compliant
+
with the BT + CDVT limit of
Leaky Bkt 2. With policing = 3,
the cells are tagged as CLP=1
and admitted to the network.
SCR
2
1
CLP=1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents