Y-Cabling Of Bni Backcard, Smf-2-Bc; Figure 4-8 Y-Cable (Model Smfy), Lc-Oc-3-Smf (Model Smf-2-Bc) - Cisco BPX-BXM-155-8DX Installation And Configuration Manual

Chapter 4 BNI (Trunk) Cards

Y-Cabling of BNI Backcard, SMF-2-BC

Y-Cabling of BNI Backcard, SMF-2-BC
The LM-OC-3-SMF (Model SMF-2-BC) backcards may be Y-cabled for redundancy by using the
Y-Cable splitter shown in Figure 4-8. You must configure the cards for Y-Cable redundancy by using
the addyred command.
Figure 4-8 Y-Cable (Model SMFY), LC-OC-3-SMF (Model SMF-2-BC)
Cisco BPX 8600 Series Installation and Configuration
4-14
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001