Dip Switches - Cisco BPX-BXM-155-8DX Installation And Configuration Manual

Equipment Description
Table 33-2 Front Panel Indicators (continued)
Indicator
T3/T2 loop
Active/Fail
Power

DIP Switches

The adapter has two front panel DIP switches:
•
•
Cisco BPX 8600 Series Installation and Configuration
33-4
Color
Red
Green/Re
d
Green
a two-position (SW-1)
This controls the configurations that may interrupt operation and should be done through a two-step
operation.
a 12-position (SW-2) switch
This enables all other configuration parameters.
Chapter 33
Description
Indicates the unit is in loop back mode, external toward
the T3 and T2 line interfaces.
Upon power up the system will go through extensive
self tests. If self-test passes, the Active/Fail LED will be
green; if self-test fails the LED will be RED.
Power ON indication.
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
AT3-6ME (T3 to T2) Interface Adapter