Table 4-4 Lm-Oc-3-Smf And Lm-Oc-3-Smflr Connectors; Table 4-5 Lm-Oc-3-Mmf Connector - Cisco BPX-BXM-155-8DX Installation And Configuration Manual

Chapter 4 BNI (Trunk) Cards
•
•
•
The Line Modules connect to the BNI through the StrataBus midplane.
For connector information, refer to Figure 4-6 and Table 4-4 for the LM-OC-3-SMF and to Figure 4-7
and Table 4-5 for the LM-OC-3-MMF.
The LM-OC-3-SMFLR uses the same type of connectors as the LM-OC-3-SMF.
Table 4-4
No
1
2
s
Table 4-5
No
1
2
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
Single-mode fiber intermediate range
Single-mode fiber long range
Multimode fiber backcard
LM-OC-3-SMF and LM-OC-3-SMFLR Connectors
Connector Function
PORT FC-PC connectors for the transmit and receive OC-3 signal to/from ATM
trunk 1.
PORT FC-PC connectors for the transmit and receive OC-3 signal to/from ATM
trunk 2.
LM-OC-3-MMF Connector
Connector Function
PORT Duplex SC connectors for the transmit and receive OC-3 signal to/from ATM
trunk 1.
PORT Duplex SC connectors for the transmit and receive OC-3 signal to/from ATM
trunk 2.
OC-3, Line Modules (SMF, SMFLR, & MMF)
Cisco BPX 8600 Series Installation and Configuration
4-11