Cisco BPX-BXM-155-8DX Installation And Configuration Manual page 317

Chapter 21 Configuring ATM Connections
Table 21-6 Connection Parameters with Default Settings and Ranges
PARAMETER WITH [DEFAULT SETTING]
PCR(0+1)[50/50]
%Util [100/100]
for UBR [1/1]
MCR[50/50]
FBTC (AAL5 Frame Base Traffic
Control):
for rt/nrt-VBR [disable]
for ABR/UBR [enable]
for Path connection [disable]
CDVT(0+1):
for CBR [10000/10000],
others [250000/250000]
VSVD[disable]
FCES (Flow Control External Segment)
[disable]
Default Extended Parameters[enable]
CLP Setting[enable]
SCR [50/50]
MBS [1000/1000]
Policing[3]
For CBR: [4]
ICR:
max[MCR, PCR/10]
ADTF[1000]
Trm[100]
VC QDepth [16000/16000]
For ATFR/ATFST [1366/1366]
CLP Hi [80/80]
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
BXM T3/E3, OC3 & OC12 RANGE
50- T3/E3 cells/sec
50 - OC3
50 - OC12
0 - 100%
cells/sec
6 - T3/E3OC3/0C12
enable/disable
With the BXM, FBTC means packet discard
Note
on queueing only.
0 - 5,000,000 usec
enable/disable
enable/disable
enable/disable
enable/disable
cells/sec
50 - T3/E3OC3/OC12
1 - 5,000,000cells
1 - VBR.1
2 - VBR.2
3 - VBR.3
4 - PCR policing only
5 - off
MCR - PCR cells/sec
62 - 8000 msec
ABRSTD: 1 - 100 msec
ABRFST: 3 - 255 msec
0 - 61440 cells
1 - 100%
Cisco BPX 8600 Series Installation and Configuration
ATM Connection Configuration
21-25