Setting up the BME OC-12 Port Loop
Figure 14-5 Y-Cable for BXM T3/E3 Cards
SMB
SMB
Setting up the BME OC-12 Port Loop
To set up the two ports on the OC-12 backcard for the BME multicast card, connect both:
•
•
Thus you have looped the two ports together. This is shown in Figure 14-6.
Cisco BPX 8600 Series Installation and Configuration
14-8
4" Lengths
the transmit of port 1 to the receive of port 2
the receive to port 1 to the transmit of port 2
16''
BNC
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
Chapter 14
Connecting Cables