Installing Router Assembly In A 19-Inch Open Rack; Figure 8-7 Installing The Router Enclosure Assembly In The Cisco Bpx 7650 Cabinet - Cisco BPX-BXM-155-8DX Installation And Configuration Manual

Installing a 7200 or 7500 Router in a BPX 8650 Cabinet or Rack
Step 8 If this is an AC-powered shelf, proceed to Chapter 11, Installing the AC Shelf.
Figure 8-7
Cable management bracket

Installing Router Assembly in a 19-Inch Open Rack

Install the router enclosure assembly in BPX 8650 cabinet (see Figure 8-8):
Step 1 Slide the router enclosure assembly into the cabinet on top of the BPX shelf.
Step 2 Attach the two support brackets (for 19-inch open rack mounting) from the hardware kit, one to each
side of the router enclosure assembly, using two securing screws for each bracket.
Step 3 Secure the front of the router assembly to rack with two screws on each side.
Connect the power cord to the router connector receptacle at the front of the cabinet, and close the router
Step 4
enclosure assembly door.
Step 5 Use the tie wraps provided in the hardware kit to secure power cord to a Cable Management Bracket.
Step 6 If this is a DC-powered shelf, proceed to Chapter 10, Installing the DC Shelf.
Cisco BPX 8600 Series Installation and Configuration
8-8
Installing the Router Enclosure Assembly in the Cisco BPX 7650 Cabinet
Support bracket
with lip
Chapter 8 Installation with Cisco Cabinets including 7000 Series Routers
19 in. cabinet
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
le r
C o n tr o
S w it c h
L a b e l
6 0 0
B P X 8 SER IES
C IS C O
T C H
S W I
R E A
E A
W I D