Summary Of Vsi Commands; Table 23-15 Commands For Setting Up A Vsi (Virtual Switch Interface) Controller - Cisco BPX-BXM-155-8DX Installation And Configuration Manual

Summary of VSI Commands

Summary of VSI Commands

Table 23-15 Commands for Setting up a VSI (Virtual Switch Interface) Controller

Mnemonic
addctrlr
addshelf
cnfqbin
cnfrsrc
cnfvsiif
cnfvsipart
delctrlr
delshelf
dspcd
dspchuse
dspctrlrs
dspqbin
dspqbintmt
dsprsrc
dspsct
dspvsiif
dspvsipartcnf
dspvsipartinfo
Cisco BPX 8600 Series Installation and Configuration
23-40
Description
Attach a controller to a node; for controllers that require Annex G capabilities
in the controller interface. Add a PNNI VSI controller to a BPX node through
an AAL5 interface shelf
Add a trunk between the hub node and interface shelf or VSI-MPLS
(Multiprotocol Label Switching) controller).
Configure qbin card. If you answer Yes when prompted, the command will used
the card qbin values from the qbin templates.
Configure resources, for example, for Automatic Routing Management PVCs
and MPLS (Multiprotocol Label Switching) Controller (LSC)
Configure VSI Interface or a different template to an interface.
Configure VSI paritition characteristics for VSI ILMI.
Delete a controller, such as a Service Expansion Shelf (SES) PNNI controller,
from a BPX node
Delete a trunk between a hub node and access shelf
Display the card configuration.
Display a summary of chennel distribution in a given slot.
Display the VSI controllers, such as an PNNI controller, on a BPX node
Displays qbin parameters currently configured for the virtual interface
Display qbin template
Display LSC (Label Switching Controller) resources
Display Service Class Template assigned to an interface . The command has
three levels of operation:
dspsct
With no arguments lists all the service templates resident in the node.
dspsct <tmplt_id>
Lists all the Service Classes in the template.
dspsct <tmplt_id>
SC lists all the parameters of that Service Class.
Display VSI Interface
Display information about VSI ILMI functionality.
Display VSI resource status for the trunk and partition.
Chapter 23 Configuring BXM Virtual Switch Interfaces
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001