Front Panel Description; Table 3-4 Asm Front Panel Controls And Indicators - Cisco BPX-BXM-155-8DX Installation And Configuration Manual

Cisco bpx-bxm-155-8dx: user guide
Table of Contents

Advertisement

Alarm/Status Monitor Card

Front Panel Description

The front panel displays the status of the node and any major or minor alarms that might be present.
Figure 3-5 illustrates the front panel of the ASM card. Each front panel feature is described in
Table 3-4.
Table 3-4
No
1
2
3
4
5
6
Cisco BPX 8600 Series Installation and Configuration
3-12
Fan and temperature monitor
Each of the three cooling fans is monitored by the fan monitor circuit which forwards a warning to
the BPX switch system software if any fan falls below a preset RPM. Cabinet internal temperature
is also monitored by the ASM which sends the temperature to the system software to be displayed
on the NMS terminal. The range that can be displayed is 0 degrees to 60 degrees Centigrade.
Card detection.
ASM Front Panel Controls and Indicators
Controls/
Indicator
Function
alarms LEDs
A red major alarm and a yellow minor alarm indicator to display the
status of the local node. In general, a major alarm is affects service
whereas a minor alarm is a failure that does not affect service.
dc LEDs
Two green LEDs display the status of the two DC power busses on the
Stratabus backplane. ON indicates voltage within tolerance. OFF
indicates an out-of-tolerance voltage.
ACO/hist LEDs
ACO LED (yellow) lights when you press the front panel ACO
pushbutton. History LED (green) indicates an alarm has been detected
by the ASM at some time in the past but might not be clear at present
time.
ACO switch
When operated, releases the audible alarm relay.
history clear
Extinguishes the history LED if the alarm condition has cleared. If the
switch
alarm is still present when the history clear switch is thrown, the
history LED will stay lit.
card status LEDs Active (green) indicates the card is online and clear of alarms. Standby
(yellow) indicates the card is offline. Fault (red) indicates a card failure
is detected by the card self-test diagnostics.
Chapter 3
BPX Switch Common Core Components
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents