Configuring The Cisco Wan Manager Workstation; Figure 20-2 Cisco Wan Manager Physical Lan And Ip Relay Network - Cisco BPX-BXM-155-8DX Installation And Configuration Manual

Chapter 20 Configuring Network Management

Figure 20-2 Cisco WAN Manager Physical LAN and IP Relay Network

Cisco
WAN Manager

Configuring the Cisco WAN Manager Workstation

Step 1 Contact your System Administrator to obtain IP addresses.
Note: For the workstation to use /etc/hosts, it must not be able to access the NIS directory even though
it may be linked to other LANs besides its own local network.
Step 2 Enter physical IP addresses and physical LAN node names (with a letter "p", for example, such as
"nw1bpx1p", to differentiate from IP relay name) in /etc/hosts and also enter IP relay addresses with
actual configured node names ("nw1bpx1", for example).
beacon% more /etc/hosts
#
# Sun Host Database
#
# If the NIS is running, this file is only consulted when booting
#
127.0.0.1
#
204.179.61.121
# node physical ethernet LAN addresses
204.179.61.104 nw1bpx1p
204.179.61.71 nw1axi1p
# node ip relay addresses
204.179.55.101 nw1ipx1
204.179.55.102 nw1ipx2
204.179.55.103 nw1ipx3
204.179.55.123 nw1igx1
204.179.55.111 nw1bpx1
204.179.55.105 nw1axi1
If the workstation is connected to the corporate network for access to hosts on another network, add any
IP addresses and associated names of the hosts that you may want to connect to your workstation,
because the NIS is disabled.
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
NMS
Ethernet LAN
204.179.31.XX
BPX
switch
MGX
8220
IP relay
network
IGX
204.179.55.XX
switch
localhost
beacon loghost
Configuring the BPX Switch LAN and IP Relay
IGX
switch
IGX
switch
Cisco BPX 8600 Series Installation and Configuration
20-5