Cisco BPX-BXM-155-8DX Installation And Configuration Manual page 420

Command Line Interface Examples
An example of the cnfportq command:
pubsbpx1
Port:
Interface:
Type:
Speed:
SVC Queue Pool Size:
CBR Queue Depth:
CBR Queue CLP High Threshold: 80%
CBR Queue CLP Low Threshold:
CBR Queue EFCI Threshold:
nrt-VBR Queue Depth:
nrt-VBR Queue CLP High Threshold: 80% UBR/ABR Queue CLP High Threshold:
nrt-VBR Queue CLP Low Threshold:
nrt-VBR Queue EFCI Threshold: 60%
This Command: cnfportq 2.2
SVC Queue Pool Size [0]:
An example of the upport command:
pubsbpx1
Port:
Interface:
Type:
Shift:
SIG Queue Depth:
Protocol:
Last Command: upport 2.2
Next Command:
Cisco BPX 8600 Series Installation and Configuration
24-8
TN silves
2.2 [INACTIVE]
LM-BXM
UNI
353208 (cps)
0
600
60%
60%
5000
60% UBR/ABR Queue CLP Low/EPD Threshold:60%
TN silves
2.2 [ACTIVE ]
LM-BXM
UNI
SHIFT ON HCF (Normal Operation)
640
NONE
Chapter 24
BPX 8620 9.3 March 2 2000 13:57 PDT
rt-VBR Queue Depth:
rt-VBR Queue CLP High Threshold:
rt-VBR Queue CLP Low/EPD Threshold: 60%
rt-VBR Queue EFCI Threshold:
UBR/ABR Queue Depth:
UBR/ABR Queue EFCI Threshold:
BPX 8620 9.3 March 2 2000 13:58 PDT
CAC Override:
%Util Use:
Port Load:
Protocol by Card: No
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
Configuring BXM Virtual Circuits
5000
80%
60%
20000
80%
20%
Enabled
Disabled
0 %