Alarm Output Connections; Figure 14-6 Looping Ports 1 And 2 For Bme On Oc-12 Backcard - Cisco BPX-BXM-155-8DX Installation And Configuration Manual

Chapter 14 Connecting Cables

Alarm Output Connections

Figure 14-6 Looping Ports 1 and 2 for BME on OC-12 Backcard

Attenuators
Alarm Output Connections
Dry contact relay closures are available for forwarding BPX switch alarms to a user office alarm
system. Separate visual and audible alarm outputs are available for both major as well as minor alarm
outputs.
These outputs are available from a DB15 connector on the LM-ASM faceplate (see Figure 14-7). Refer
to Chapter 32, BPX Switch Cabling Summary, for a list of the pinouts for this connector. Use
switchboard cable for running these connections.
Cisco BPX 8600 Series Installation and Configuration
14-9
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001