Y-Cabling Of Smf-622 Series Backcards; Figure 5-8 Bpx-T3/E3 Back Card, 12-Port Option Shown - Cisco BPX-BXM-155-8DX Installation And Configuration Manual

Chapter 5 BXM Card Sets: T3/E3, 155, and 622

Y-Cabling of SMF-622 Series Backcards

Figure 5-8 BPX-T3/E3 Back Card, 12-Port Option Shown
Y-Cabling of SMF-622 Series Backcards
You can Y-cable the SMF-622 series backcards for redundancy by using the Y-Cable splitter shown in
Figure 5-9. To configure the cards for Y-Cable redundancy, use the addyred command.
Cisco BPX 8600 Series Installation and Configuration
5-18
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001