Front-Panel Description - Cisco Catalyst 2950 Hardware Installation Manual

Front-Panel Description

Table 2-1 LRE Switch and CPE Compatibility Matrix
LRE Devices
Cisco 575 LRE
CPE
Cisco 576 LRE 997
CPE
Cisco 585 LRE
CPE
Front-Panel Description
Catalyst 2950 Desktop Switch Hardware Installation Guide
2-4
Certain Cisco LRE customer premises equipment (CPE) devices are not supported
by certain Catalyst 2950 LRE switches. In
supported by the switch; No means that the CPE is not supported by the switch.
Catalyst 2950ST-8 LRE
switch
Yes
No
Yes
The switch front panel contains the ports, the LEDs, and the Mode button.
Other than the Catalyst 2950ST-24 LRE 997 switch, the front panel of the
Catalyst 2950 LRE switches also contains the console port and AC power
connector. On the Catalyst 2950ST-24 LRE 997 switch, the front panel contains a
DC power connector (also referred to as the terminal block header), a DC ground
lug, and an RJ-45 console port.
For more information about the power connectors on the LRE switches, see the
"Power Connectors" section on page
port on these switches, see the
Table
Catalyst 2950ST-24 LRE
switch
Yes
No
Yes
2-29. For more information on the console
"Console Port" section on page
Chapter 2
2-1, Yes means that the CPE is
Catalyst 2950ST-24 LRE 997
switch
No
Yes
No
2-31.
78-11157-05
Overview