Chapter 31 Bpx Node Specifications - Cisco BPX-BXM-155-8DX Installation And Configuration Manual

BPX Node Specifications
This chapter lists information for the BPX system specifications. For the latest information, refer to
Cisco online documents.
System Capacity:
Network Interface:
Network Trunks:
Network Interface
Protocol:
Cell Switching:
Switch Capacity:
Slot Rate:
Connection Rate:
Classes of Service:
Clock Sources:
Clock Output:
Cabinet Size:
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
1 shelf with 15 card slots.
Requires 1 or 2 dedicated slot(s) for BCC card.
Requires 1 dedicated slot for ASM card.
T3, E3, OC3, and OC12.
32 per node max.
ATM layer using 53-byte cell.
Crosspoint switch matrix, non-blocking.
9.6 Gbps or 19.2 Gbps (with BCC-4).
800 Mbps each, including overhead.
20 million cell connections/sec. between slots.
32 queues per port, assignable.
Internal, free-running oscillator, Stratum 3.
Phase-locked to any appropriate network interface.
External input at T1 or E1 rate.
Single clock output at T1 or E1 rate for synchronizing co-located
IGX node or CPE.
22.75 inches (57.8 cm) high
19.0 inches (48.25 cm) wide
27.0 inches (68.6 cm) deep
Cisco BPX 8600 Series Installation and Configuration
31
C H A P T E R
31-1