Table 15-8 V.34R Auto-Dial Configuration (Dial-Out To Customer Service) - Cisco BPX-BXM-155-8DX Installation And Configuration Manual

Connecting Dial-In and Dial-Out Modems

Table 15-8 V.34R Auto-Dial Configuration (dial-out to customer service)*

Step
These configuration commands are for a V.34R modem that does not have a talk/data
pushbutton.
1.
2.
3.
4
5.
6.
7.
8.
9.
10.
11.
Cisco BPX 8600 Series Installation and Configuration
15-14
Command Function
AT&F Initializes factory defaults.
ATL1 Modem speaker at minimum volume.
AT*SM3 Enables automatic MNP error correction.
AT*DC0 Disables data compression.
AT*SC1 Enables DTE speed conversion.
AT*FL1 Enables XON/XOFF flow control.
AT*SI1 Enables 5-minute inactivity disconnect.
AT&C1 DCD controlled by modem.
AT&D2 Modem disconnects when toggles DTR.
AT&V Verify entries.
AT&W Saves current settings to non-volatile memory.
Chapter 15 Connecting Temporary Terminal and Attaching Peripherals
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001