Cisco BPX-BXM-155-8DX Installation And Configuration Manual page 214

Installing the Cards
• Use either a Broadband Controller Card:
BCC-4V
BCC-3-32M
BCC-3-64M, or
BCC-32
in front slot number 7.
With a
•
BCC-4V
BCC-3-32M, or
BCC-3-64M front card,
use a BCC-3-BC backcard in back slot number 7 ,
OR:
• With a BCC-32 front card, use a BCC15-BC in back slot number 7.
Redundant Nodes:
• Use two Broadband Controller Cards, a pair of:
BCC-4Vs,
BCC-3-32Ms,
BCC-3-64Ms, or
BCC-32s
in front slot numbers 7 and 8.
With:
•
BCC-4V,
BCC-3-32M, or
BCC-3-64M front cards
use BCC-3-BC backcards in back slot numbers 7 and 8 ,
OR:
With BCC-32 front cards, use BCC15-BC backcards in back slot numbers 7 and 8.
•
Note In some cases, it may be possible to operate two of the three types of BCCs with their
proper backcards temporarily for maintenance purposes, that is, replacing a failed
controller card. Contact Customer Service for assistance.
• Place the ASM card in front slot number 15.
• Place the LM -ASM card in back slot number 15.
• Place the cards BNI-3T3 or BNI-3E3 in any other front slot than 7, 8, or 15.
• Place the cards LM -3T3, LM-3E3, 2OC3-SMF, 2OC3-MMF in all back slots with a BNI in the
corresponding front slot.
Cisco BPX 8600 Series Installation and Configuration
13-2
Chapter 13 Installing the BPX Switch Cards
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001