Show Ip Arp Inspection; Show Ip Arp Inspection List - Cisco 300 Series Cli Manual

DHCP Snooping and ARP Inspection Commands
78-21075-01 Command Line Interface Reference Guide

42.28 show ip arp inspection

Use the show ip arp inspection EXEC mode command to display the ARP
inspection configuration for all interfaces or for a specific interface.
Syntax
show ip arp inspection
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types:Ethernet port or Port-channel.
Command Mode
EXEC mode
Example
The following example displays the ARP inspection configuration.
switchxxxxxx
# show ip arp inspection
IP ARP inspection is Enabled
IP ARP inspection is configured on following VLANs: 1
Verification of packet header is Enabled
IP ARP inspection logging interval is: 222
Interface Trusted
----------- -----------
gi1 Yes
gi2 Yes

42.29 show ip arp inspection list

Use the show ip arp inspection list Privileged EXEC mode command to display the
static ARP binding list.
Syntax
show ip arp inspection list
[interface-id]
seconds
42
705