Status Menu: Ts Input - Cisco D9854 Installation And Operation Manual

Status Menu: TS Input

Level (dBm)
Description:
Parameters:
SymRate
Description:
Parameters:
FEC
Description:
Parameters:
Modulation
Description:
Parameters:
IQ
Description:
Parameters:
Pol
Description:
Parameters:
Dnlk Freq (GHz)
Description:
Parameters:
L-Band
Description:
Parameters:
Pilot Present
Description:
Parameters:
C/N (dB)
Description:
Parameters:
4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide
Indicates the signal level of the received signal.
in dBm.
Indicates the Symbol Rate of the received signal.
in Msymbols/second.
Indicates the FEC (Forward Error Correction) rate of the received
signal.
N/A, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 7/8, 8/9 or 9/10.
Indicates the modulation type for the received signal.
N/A, QPSK, 8PSK, DVB-S or DVB-S2.
Indicates the IQ (Input Signal Inversion) for the received signal.
Inv or NonInv.
Indicates the signal polarization setting. This setting is only
applicable when LNB Power is set to H-NIT or V-NIT. The selected
setting must match the polarization of the transmitted signal.
Horiz (Horizontal), Vert (Vertical) or Auto.
Indicates the current downlink frequency.
in GHz.
Indicates the current L-Band frequency.
in MHz.
Indicates whether a Pilot is present for the received signal. The Pilot
is set on the modulator for input signal synchronization purposes.
Yes or No.
Indicates the current Carrier-to-Noise ratio.
in dB.
4-19