Telnet Command: Ip6 Dhcp Req_Opt - Draytek Vigor2860 Series User Manual

Unicast Address:
FE80::250:7FFF:FE00:0/64 (Link)
Multicast Address:
FF02::2
FF02::1:FF00:0
FF02::1
T e l n e t C o m m
T e l n e t C o m m
This command is used to configure option-request settings for DHCPv6 client.
ip6 dhcp req_opt [LAN|WAN1|WAN2|iface#] [-<command> <parameter>| ... ]
S y n t a x
S y n t a x
Parameter
req_opt
LAN|WAN1|WAN2|iface
#
[<command>
<parameter>|...]
-a
-s
-S
-d
-D
-n
-i
-I
-p
-P
-b
Vigor2860 Series User's Guide
a n d : i p 6 d h c p r e
a n d : i p 6 d h c p r e
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means option-request.
It means to specify LAN or WAN interface for such
address.
The available commands with parameters are listed
below.
[...] means that you can type in several commands in
one line.
It means to show current DHCPv6 status.
It means to ask the SIP.
It means to ask the SIP name.
It means to ask the DNS setting.
It means to ask the DNS name.
It means to ask NTP.
It means to ask NIS.
It means to ask NIS name.
It means to ask NISP.
It means to ask NISP name.
It means to ask BCMCS.
q _ o p t
q _ o p t
610