Draytek Vigor2860 Series User Manual page 364

Hide thumbs Also See for Vigor2860 Series:

Table of Contents

Display Name

Dial Out Account

Loop through

Backup Phone Number

Secure Phone

After finishing all the settings here, please click OK to save the configuration.

Note: If the incoming or outgoing calls do not match any entry on the phonebook, the

router will try to make the call "being protected". But, if the call ends up "unprotected"(e.g.

peer side does not support ZRTP+SRTP), the router will not play out a warning message.

Vigor2860 Series User's Guide

number you choose, using digits 0-9 and * .

The Caller-ID that you want to be displayed on your

friend's screen. This let your friend can easily know who's

calling without memorizing lots of SIP URL Address.

Enter your friend's SIP Address.

Choose one of the SIP accounts for this profile to dial out. It

is useful for both sides (caller and callee) that registered to

different SIP Registrar servers. If caller and callee do not

use the same SIP server, sometimes, the VoIP phone call

connection may not succeed. By using the specified dial out

account, the successful connection can be assured.

Choose PSTN to enable loop through function.

When the VoIP phone obstructs or the Internet breaks down

for some reasons, the backup phone will be dialed out to

replace the VoIP phone number. At this time, the phone call

will be changed from VoIP phone into PSTN call according

to the loop through direction chosen. Note that, during the

phone switch, the blare of phone will appear for a short

time. And when the VoIP phone is switched into the PSTN

phone, the telecom co. might charge you for the connection

fee. Please type in backup phone number for this VoIP

phone setting.

ZRTP+SRTP - It allows users to have encrypted RTP

stream with the peer side using the same protocol

(ZRTP+SRTP). Check this box to have secure call.

Return to previous web page.