Draytek Vigor2860 Series User Manual page 735

enable
disable
flush
lineno [w]
level[x]
feature [on/off][y]
voip_feature
[on/off][vf_name]
log
E x a m p l e
E x a m p l e
> sys diag_log status
Status:
diag_log is Enabled.
lineno : 10000.
level : 3.
Enabled feature: SYS DSL
> sys diag_log log
0:00:02 [DSL] Current modem firmware: AnnexA_548006_544401
0:00:02 [DSL] Modem firmware feature: 5, ADSL_A, VDSL2
0:00:02 [DSL] xtseCfg=04 00 04 00 0c 01 00 07
0:00:02 [DSL] don't have last showtime mode!! set next mode to VDSL!!
0:00:02 [DSL] Status has changed: Stopped(0) -> FwWait(3)
0:00:02 [DSL] Status has changed: FwWait(3) -> Starting(1)
It means to enable the function of diag_log.
It means to disenable the function of diag_log.
It means the flush log buffer.
It means the total lines for displaying message.
w - Available value ranges from 100 to 50000.
It determines the level of data displayed.
x – Available value ranges from 0 to 12. The larger the
number is, the detailed the data is displayed.
It is used to specify the function of the log. Supported
features include SYS and DSL (Case-Insensitive).
Default setting is "on" for "DSL".
It means VoIP feature. Type on to enable the feature or
type off to disable the feature.
vf_name: available settings include DRVTAPI,
DRVVMMC, DRVMPS, DRVFXO, DRVHAL,
PSMPHONE, PSMSUPP, PSM, FXO, PSMISDN,
DTMFPSER, CALLERID (Case-Insensitive).
It means the dump log buffer.
721
Vigor2860 Series User's Guide