Telnet Command: Srv Nat Dmz - Draytek Vigor2860 Series User Manual

T e l n e t C o m m
T e l n e t C o m m
This command allows users to set DMZ host. Before using this command, please set WAN IP
Alias first.
Srv nat dmz n m [-<command> <parameter> | ... ]
S y n t a x
S y n t a x
Parameter
n
m
[<command>
<parameter>|...]
-e
-i
-r
-v
E x a m p
E x a m p
> srv nat dmz 1 1 -i 192.168.1.96
> srv nat dmz -v
%
Index Status WAN1 aux IP
----------------------------------------------------
1
Vigor2860 Series User's Guide
a n d : s r v n a t d m z
a n d : s r v n a t d m z
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to map selected WAN IP to certain host.
1: wan1
2: wan2
It means the index number of the DMZ host.
Default setting is "1" (WAN 1). It is only available for
Static IP mode. If you use other mode, you can set 1 ~ 8
in this field. If WAN IP alias has been configured, then
the number of DMZ host can be added more.
The available commands with parameters are listed
below.
[...] means that you can type in several commands in
one line.
It means to enable/disable such feature.
1:enable
0:disable
It means to specify the private IP address of the DMZ
host.
It means to remove DMZ host setting.
It means to display current status.
l e
l e
WAN1 DMZ mapping status:
Disable 0.0.0.0 192.168.1.96
Private IP
698