Telnet Command: Exit; Telnet Command: Internet - Draytek Vigor2860 Series User Manual

T e l n e t C o m m
T e l n e t C o m m
Type this command will leave telnet window.
T e l n e t C o m m
T e l n e t C o m m
This command allows you to configure detailed settings for WAN connection.
internet -W n -M n [-<command> <parameter> | ... ]
S y n t a x
S y n t a x
Parameter
-M n
<command><paramete
r>|...]
-S <isp name>
-P <on/off>
-u <username>
-p <password>
-a n
-t n
Vigor2860 Series User's Guide
a n d : e x i t
a n d : e x i t
a n d : I n t e r n e t
a n d : I n t e r n e t
D e s c r i p t i o n
D e s c r i p t i o n
Description
M means to set Internet Access Mode (Mandatory) and
n means different modes (represented by 0 – 3)
n=0: Offline
n=1: PPPoE
n=2: Dynamic IP
n=3: Static IP
The available commands with parameters are listed
below.
[...] means that you can type in several commands in
one line.
It means to set ISP Name (max. 23 characters).
It means to enable PPPoE Service.
It means to set username (max. 49 characters) for
Internet accessing.
It means to set password (max. 49 characters) for
Internet accessing.
It means to set PPP Authentication Type and n means
different types (represented by 0-1).
n=0: PAP/CHAP (this is default setting)
n=1: PAP Only
It means to set connection duration and n means
different conditions.
n=-1: Always-on
n=1 ~ 999: Idle time for offline (default 180 seconds)
588