Draytek Vigor2860 Series User Manual page 112

DNS Server IP Address
After finishing all the settings here, please click OK to activate them.
D e t a i l s
D e t a i l s
To choose PPPoE as the accessing protocol of the Internet, please select PPPoE from the
WAN>>Internet Access >>WAN2 page. The following web page will be shown.
Available settings are explained as follows:
Item
Enable/Disable
Vigor2860 Series User's Guide
Specify an IP address – Click this radio button to specify
some data.
Default MAC Address – Type in MAC address for the
router. You can use Default MAC Address or specify
another MAC address for your necessity.
Specify a MAC Address – Type in the MAC address for
the router manually.
Type in the primary IP address for the router. If necessary,
type in secondary IP address for necessity in the future.
P a g e f o r P P P o E i n
P a g e f o r P P P o E i n
Description
Click Enable for activating this function. If you click
Disable, this function will be closed and all the settings that
you adjusted in this page will be invalid.

Username: Type a name as username. The
maximum length of the user name you can set is
63 characters.

Password: Type a password. The maximum
length of the password you can set is 62
characters.

IP Address – Type in the private IP address.

Subnet Mask – Type in the subnet mask.

Gateway IP Address – Type in gateway IP
address.
W A N 2
W A N 2
98