Draytek Vigor2860 Series User Manual page 656

-s[value]
-i[value]
-f
-d
-v
-h
E x a m p
E x a m p
> mngt lanaccess -e 1
> mngt lanaccess -s FTP,TELNET
> mngt lanaccess -i LAN3
> > mngt lanaccess -v
Current LAN Access Control Setting:
* Enable:Yes
* Service:
- FTP:Yes
- HTTP:No
- HTTPS:No
- TELNET:Yes
- SSH:No
* Subnet:
- LAN 2: disabled
- LAN 3: enabled
- LAN 4: disabled
- LAN 5: disabled
Vigor2860 Series User's Guide
0-disable the function.
1-enable the function.
It means to specify service offered.
Available values include:
FTP, HTTP, HTTPS, TELNET, SSH, None, All
It means the interface which is allowed to access.
Available values include:
LAN2~LAN6, DMZ, IP Routed Subnet, None, All
Note: LAN1 is always allowed for accessing into the
router.
It means to flush all of the settings.
It means to restore the factory default settings.
It means to view current settings.
It means to get the usage of such command.
l e
l e
642