Telnet Command: Wl Stamgt - Draytek Vigor2860 Series User Manual

wl scan show 3
>
>
T e l n e t C o m m a n d
T e l n e t C o m m a n d
This command is used to configure connection time and reconnection time for each SSID that
wireless client used for accessing into Internet.
wl stamgt [enable/disable] [ssid_num].
wl stamgt [show] [ssid_num].
wl stamgt set [ssid_num] [c] [r]
wl stamgt reset [ssid_num].
S y n t a x D e
S y n t a x D e
Parameter
enable/disable
ssid_num
show
c
r
E x a m p l e
E x a m p l e
> wl stamgt enable 1
% Station Management Status: enabled
> wl stamgt set 1 60 60
> wl stamgt show 1
NO. SSID
1. Draytek
: w l s t a m g t
: w l s t a m g t
s c r i p t i o n
s c r i p t i o n
Description
It means to enable/disable the station management
control.
It means channel selection.
Available channel for 2.4G: 0/1/2/3
Available channel for 5G: 4/5/6/7.
It means to display status or configuration of the
selected channel.
It means connection time. The unit is minute.
It means reconnection time. The unit is minute.
BSSID
00:11:22:aa:bb:cc
Connect time Reconnect time
0d:0:58:26
763
0d:0:0
Vigor2860 Series User's Guide