Draytek Vigor2860 Series User Manual page 409

Application
IP Address
Port
Idle Timeout
Scaling
Screen Size
SMB Path
3. Enter the required information.
4. After finished the above settings, click OK to save the configuration.
There are three types offered for you to create an
application profile.
Virtual Network Computing (VNC) – It allows you to
access and control a remote PC through VNC protocol.
Remote Desktop Protocol (RDP) – It allows you to access
and control a remote PC through RDP protocol.
SMB Application – It allows you to access and control a
remote PC for file sharing.
If you choose VNC or RDP, you have to type the IP address
for this protocol.
If you choose VNC or RDP, you have to specify the port
used for this protocol. The default setting is 5900.
If you choose VNC, you have to specify the time for
disconnecting the SSL VPN tunnel.
If you choose VNC, you have to choose the percentage
(100%, 80%, 60%) for such application.
If you choose RDP, you have to choose the screen size for
such application.
If you choose SMB Application, you have to specify the
path/directory for file sharing.
395
Vigor2860 Series User's Guide