Telnet Command: Object Ipv6 Grp - Draytek Vigor2860 Series User Manual

[START_IP]
[END/MASK_IP]
E x a m p l e
E x a m p l e
> object ip obj 1 -n marketing
> object ip obj 1 -a 1 192.168.1.45
> object ip obj 1 -v
IP Object Profile 1
Name :[marketing]
Interface:[Any]
Address type:[single]
Start ip address:[192.168.1.45]
End/Mask ip address:[0.0.0.0]
Invert Selection:[0]
T e l n e t C o m m a n d
T e l n e t C o m m a n d
This command is used to integrate several IP objects under an IP group profile.
object ip grp setdefault
object ip grp INDEX -v
object ip grp INDEX -n NAME
object ip grp INDEX -i INTERFACE
object ip grp INDEX -a IP_OBJ_INDEX
S y n t a x D e
S y n t a x D e
Parameter
setdefault
INDEX
TYPE=1, means Single
TYPE=2, means Any
TYPE=3, means Rang
Example:
When the TYPE is set with 2, you have to type an IP
address as a starting point and another IP address as
end point.
Type an IP address.
Type an IP address (different with START_IP) as the
end IP address.
: o b j e c t i p v 6 g r p
: o b j e c t i p v 6 g r p
s c r i p t i o n
s c r i p t i o n
Description
It means to return to default settings for all profiles.
It means the index number of the specified group profile.
object ip obj 3 -a 2
663
Vigor2860 Series User's Guide