Draytek Vigor2860 Series User Manual page 644

<Address Mask>
-d o:g <obj>
-S o:g <obj>
-S u <protocol>
<source_port__value>
<destination_port_vale
>
Vigor2860 Series User's Guide
u – It means "user defined".
Address Type - Type the number (representing different
address type).
0 - Subnet Address
1 - Single Address
2 - Any Address
3 - Range Address
Example:
Set Subnet Address => -d u 0 192.168.1.10
255.255.255.0
Set Single Address => -d u 1 192.168.1.10
Set Any Address => -d u 2
Set Range Address => -d u 3 192.168.1.10
192.168.1.15
It means to specify destination IP object and IP group.
o – indicates "object".
g – indicates "group"
<obj>– indicates index number of object or index
number of group. Available settings range from 1-192.
For example, "-d g 1" means the first destination IP
group profile.
It means to specify Service Type object and IP group.
o – indicates "object".
g – indicates "group"
<obj> – indicates index number of object or index
number of group. Available settings range from 1-96.
For example, "-S 0 1" means the first service type object
profile.
It means to configure advanced settings for Service
Type, such as protocol and port range.
u – it means "user defined".
<protocol> – It means TCP(6),UDP(17), TCP/UDP(255).
630